Task 4.3: Configure the Web server with the Appeon cluster plug-in

Type 1: IIS Web server

Method 1: Automatic configuration
Installing and configuring Appeon cluster plug-in

Step 1: Get the Appeon cluster plug-in installation package.

After you install PowerServer Web Component, you can find the Appeon Cluster plugin folder under the WebComponent[version]\appeon\IISSupport\ directory, and this folder is the Appeon cluster plug-in installation package, as shown in the following figure. You can copy this installation package to any Web server associated with the PowerServer cluster.

Figure 58. Appeon Cluster plugin

Appeon Cluster plugin

Step 2: Double-click AppeonCluster.exe under the Appeon Cluster plugin folder to install the Appeon cluster plug-in to the Web server.

The Appeon Cluster Plug-in Installation Wizard is displayed.

Step 3: Select Create an Appeon Cluster Plug-in on a new Web site, and click Next.

If you want to install to an existing Web site, select Create an Appeon Cluster Plug-in on an existing Web site, and click Next.

Figure 59. Create plugin on a Web site

Create plugin on a Web site

Step 4: To create the Appeon cluster plug-in on a new Web site, configure Description, Port and Home Directory, then click Next.

The new Web site will be created.

Figure 60. Configure the Web site

Configure the Web site

Step 5: Select to install a 32-bit or 64-bit Appeon cluster plug-in, and click Next. The program will detect if the server is on 32-bit OS or 64-bit OS and disable the inappropriate option.

32-bit plug-in works with 32-bit server and 64-bit server, and 64-bit plug-in works with 64-bit server only.

Figure 61. Select run mode

Select run mode

Step 6: Specify the Windows administrator user name and password, and click Next. Make sure to input the correct user name and password, otherwise you may not be able to access the Appeon Cluster Manager in the Web browser.

Figure 62. Windows administrator username and password

Windows administrator username and password

Step 7: When the plug-in is created successfully, click Finish to exit the Appeon Cluster Plug-in Installation Wizard.

Figure 63. Create the plug-in

Create the plug-in

Step 8: Restart IIS to make the new settings effective.

Configuring redirections to PowerServer

After successfully installing and configuring the Appeon cluster plug-in, you can find AppeonCloud Web console (though it is named "Cloud", it also applies to non-cloud platform) under the specified IIS Web site, as shown in the figure below. You can configure here to which PowerServer(s) and in what order the user requests should be redirected. Detailed instructions are provided below.

Another important advantage that the cluster provides is failover. To enable the failover functionality, you will need to go to the AEM, add PowerServer to the cluster and configure the failover settings there. For details, refer to the section called “Cluster” in PowerServer Configuration Guide for .NET or PowerServer Configuration Guide for J2EE.

The Appeon cluster currently supports three kinds of platforms including Local (non-cloud platform), Amazon Web Services and Windows Azure. The AppeonCloud console will display different settings according to the specific platform.

Figure 64. IIS Manager

IIS Manager

Step 1: Run the AppeonCloud console (browse the console in the right Actions pane in the IIS manager). The Appeon Cluster Manager displays.

Step 2: Input the user name and password (both "admin") to log into the Appeon Cluster Manager.

Step 3: Click Cluster Settings. The following settings will be display for the non-cloud platform.

Add the PowerServer to the list one by one. The Web server will redirect the user requests to the PowerServer in the list.

  • Specify the host name (or IP address) and port number of PowerServer.

  • Click Save. PowerServer will be added to the cluster.

    Figure 65. Local cluster settings

    Local cluster settings


Step 4: Configure the other settings of the cluster if necessary, such as load balancing algorithm, timeout, and interval.

Figure 66. Cluster settings

Cluster settings


Table 1. More cluster settings

Settings

Description

Load Balancing

Specify the load balancing algorithm which determined how requests will be distributed among the servers in the cluster. Random indicates that the plug-in distributes requests across PowerServer in random order, regardless of the status of PowerServer; Sequence indicates that the plug-in distributes requests to PowerServer in an allocated order.

Timeout

Specify the timeout for distributing a request, and the default value is 30 seconds.

Interval

Specify the interval (in seconds) for the plug-in to refresh the PowerServer list.


Method 2: Manual configuration
Configuring IIS 7.x with .NET server

Choose an existing Web site, or create a new site. The Default Web Site will be used as examples in the following guide.

  1. Installing PowerServer Web component to the Web root of the IIS server.

    Make sure you have installed PowerServer Web Component to the Web root of the IIS server. To verify it, go to the IIS Web root (by default C:\inetpub\wwwroot) and check if there is an appeon folder which at least contains the IISSupport and weblibrary_ax sub-folders. If any folder is missing, go to the default installation directory of PowerServer Web Component (C:\Program Files\Appeon\WebComponent[version]) and manually copy the entire appeon folder to the IIS Web root.

  2. Creating a virtual directory.

    Step 1: Open Control Panel | Administrative Tools | Internet Information Service (IIS) Manager.

    Step 2: Right click the Default Web Site and select Add Virtual Directory.

    Step 3: Input the alias name, for example, "ApbCluster".

    Step 4: Choose a local path in the Physical path box; for example, "C:\inetpub\wwwroot\ApbCluster".

    Step 5: Click OK.

    Figure 67. Add virtual directory

    Add virtual directory

    Step 6: Right click the ApbCluster virtual directory and select Edit Permissions.

    Step 7: Choose the Security tab, and then click the Edit button.

    Figure 68. ApbCluster properties

    ApbCluster properties

    Step 8: Select IIS_IUSRS, for example, IIS_IUSRS (HUANGXUXIA\IIS_IUSRS)from the Group or user names list, and then select the Allow check box for Modify and Write in the Permissions for IIS_IUSRS list.

    Figure 69. ApbCluster permissions

    ApbCluster permissions

    Step 9: Click OK to go back to the IIS window.

  3. Copying the Appeon plug-in (ApbCluster.dll or ApbCluster64.dll).

    Copy the ApbCluster.dll (for 32-bit OS) or ApbCluster64.dll (for 64-bit OS) plug-in from appeon\IISSupport\modules to the newly created virtual directory (C:\inetpub\wwwroot\ApbCluster in this guide).

    In the 64-bit OS, you can either use ApbCluster.dll or ApbCluster64.dll. If you use ApbCluster.dll, you will need to set the Enable 32-Bit Applications to True for the application pool used by the current Web site. If you use ApbCluster64.dll, then set this option to False.

  4. Creating the Appeon cluster configuration file (cluster-config.xml).

    Create the cluster-config.xml file in the newly created virtual directory (C:\inetpub\wwwroot\ApbCluster in this guide). The cluster-config.xml file acts as the redirector configuration file which helps the Web server redirect requests to the PowerServer according to the IP addresses/ports of PowerServer, and the load balancing algorithm that it stores.

    <?xml version="1.0" encoding="UTF-8" ?>
    <cluster-config local="true" log="debug" timeout="30" polling="5" arithmetic="sequence">
        <extention>/ApbCluster/ApbCluster.dll</extention>
        <filters>
            <filter>/AEM</filter>
            <filter>/servlet</filter>
            <filter>/reportfile</filter>
            <filter>/imagefile</filter>
            <filter>/dwfile</filter>
            <filter>/ajsdown</filter>
        </filters>
        <app-servers>
            <app-server host="192.0.0.168" port="88" />
            <app-server host="192.0.3.131" port="80" />
            <app-server host="192.0.3.145" port="80" />
        </app-servers>
    </cluster-config>

    Notes:

    • local specifies whether to read the configurations on the local server or the cloud server. For the cloud server, set Local to False.

    • log specifies the level of information to be recorded in the log file. It can be set to the following level: debug, info, warning, error, or off.

    • timeout specifies the number of seconds the Web server waits between sending an HTTP request to PowerServer and receiving information from it. The HTTP connection timeout value is 2 times of this value.

    • polling indicates the number of seconds when the configurations will be read again.

    • arithmetic="random" indicates that the random algorithm is used to pick a PowerServer; arithmetic="sequence" indicates that the round-robin algorithm is used.

    • extention specifies the location of the virtual directory which contains ApbCluster.dll (or ApbCluster64.dll), that is /virtual-directory-alias-name/ApbCluster.dll (/ApbCluster/ApbCluster.dll in this guide).

    • filter specifies the type of pages to redirect.

    • host indicates the IP address (recommended) or machine name of the PowerServer in the cluster.

    • port indicates the port number of the PowerServer in the cluster.

  5. Installing the Appeon plug-in as ISAPI Filters.

    Step 1: Open Control Panel | Administrative Tools | Internet Information Services (IIS) Manager.

    Step 2: Select Default Web Site and then double-click ISAPI Filters on the right side.

    Step 3: Right-click the blank area on the ISAPI Filters page, and click Add.

    Step 4: Input ApbCluster in the Filter name box and specify ApbCluster.dll (or ApbCluster64.dll) as the ISAPI filter in the Executable box (C:\inetpub\wwwroot\ApbCluster\ApbCluster.dll in this guide). Click OK.

    Figure 70. Add ISAPI filter

    Add ISAPI filter

  6. Copying the redirector configuration file (ApbCluster.cfg).

    Copy the ApbCluster.cfg redirector configuration file from appeon\IISSupport\conf\ to the virtual directory (C:\inetpub\wwwroot\ApbCluster in this guide) and edit the file when necessary.

    Extension_URI=/ApbCluster/ApbCluster.dll   
    MatchExpression=/AEM
    MatchExpression=/servlet
    MatchExpression=/reportfile
    MatchExpression=/imagefile
    MatchExpression=/dwfile
    MatchExpression=/ajsdown
    Log=On

    Notes:

    • The Extension_URI command points to the virtual directory where ApbCluster.dll (or ApbCluster64.dll) resides, that is /virtual-directory-alias-name/ApbCluster.dll (/ApbCluster/ApbCluster.dll in this guide).

    • The MatchExpression command specifies the pages to be redirected.

    • The Log command specifies whether logging is enabled. On indicates logging is enabled; Off indicates logging is disabled.

    • The commands and parameters are case insensitive.

  7. Setting ISAPI and CGI Restrictions.

    Step 1: Open Control Panel | Administrative Tools | Internet Information Services (IIS) Manager.

    Step 2: Select the local machine (the top node), and then double-click ISAPI and CGI Restrictions on the right side.

    Step 3: Right-click the blank area of the ISAPI and CGI Restrictions page and click Add.

    Step 4: Specify the local path of ApbCluster.dll (or ApbCluster64.dll) in the ISAPI or CGI path box and input the descriptive text in the Description box, and then select Allow extension path to execute.

    Step 5: Click OK.

    Figure 71. Add ISAPI or CGI

    Add ISAPI or CGI

  8. Enabling ISAPI-dll.

    Step 1: Open Control Panel | Administrative Tools | Internet Information Services (IIS) Manager.

    Step 2: Expand Default Web Site, select ApbCluster, and then double-click Handler Mappings on the right side.

    Step 3: Right-click ISAPI-dll, and select Edit Feature Permissions.

    Step 4: Select Read, Script, Execute, and click OK.

    Figure 72. Edit feature permissions

    Edit feature permissions

  9. Adding MIME type for loading the pages without extension names or pages without MIME types defined.

    Step 1: Select Default Web Site and then double-click MIME Types on the right of the page.

    Step 2: Right-click the blank area of the MIME Types page, and click Add.

    Step 3: Specify the following settings:

    • Extension: *

    • MIME Type: application/octet-stream

    Step 4: Click OK.

    Figure 73. Add MIME type

    Add MIME type

  10. Restarting IIS.

    Restart IIS to make the new settings effective.

Configuring IIS 7.x with J2EE server

J2EE servers refer to the Java application servers, such as WebLogic, WebSphere, JBoss, JEUS etc. The configuration is the same for the J2EE application servers that Appeon supports.

Choose an existing Web site, or create a new site. The Default Web Site will be used as examples in the following guide.

  1. Installing PowerServer Web component to the Web root of the IIS server.

    Make sure you have installed PowerServer Web Component to the Web root of the IIS server. To verify it, go to the IIS Web root (by default C:\inetpub\wwwroot) and check if there is an appeon folder which contains the IISSupport and weblibrary_ax sub-folders. If any folder is missing, go to the default installation directory of PowerServer Web Component (C:\Program Files\Appeon\WebComponent[version]) and manually copy the entire appeon folder to the IIS Web root.

  2. Creating a virtual directory.

    Step 1: Open Control Panel | Administrative Tools | Internet Information Service (IIS) Manager.

    Step 2: Right click Default Web Site and select Add Virtual Directory.

    Step 3: Input the alias name, for example, "ApbCluster".

    Step 4: Choose a local path in the Physical path box; for example, "C:\inetpub\wwwroot\ApbCluster".

    Step 5: Click OK.

    Figure 74. Add virtual directory

    Add virtual directory

    Step 6: Right click the ApbCluster virtual directory and select Edit Permissions.

    Step 7: Choose the Security tab page and then click the Edit button.

    Figure 75. appeoncluster properties

    appeoncluster properties

    Step 8: Select IIS_IUSRS, for example, IIS_IUSRS (HUANGXUXIA\IIS_IUSRS)from the Group or user names list, and then select the Allow check box for Modify and Write in the Permissions for IIS_IUSRS list.

    Figure 76. appeoncluster properties

    appeoncluster properties

    Step 9: Click OK to go back to the IIS window.

  3. Copying the Appeon plug-in (ApbCluster.dll or ApbCluster64.dll).

    Copy the ApbCluster.dll (for 32-bit OS) or ApbCluster64.dll (for 64-bit OS) plug-in from appeon\IISSupport\modules to the newly created virtual directory (C:\inetpub\wwwroot\ApbCluster in this guide).

    In the 64-bit OS, you can either use ApbCluster.dll or ApbCluster64.dll. If you use ApbCluster.dll, you will need to set the Enable 32-Bit Applications to True for the application pool used by the current Web site. If you use ApbCluster64.dll, then set this option to False.

  4. Creating the Appeon cluster configuration file (cluster-config.xml).

    Create the cluster-config.xml file in the newly created virtual directory (C:\inetpub\wwwroot\ApbCluster in this guide). The cluster-config.xml file acts as the redirector configuration file which helps the Web server redirect requests to the PowerServer according to the IP addresses/ports of PowerServer, and the load balancing algorithm that it stores.

    <?xml version="1.0" encoding="UTF-8" ?>
    <cluster-config local="true" log="debug" timeout="30" polling="5" arithmetic="sequence">
        <extention>/ApbCluster/ApbCluster.dll</extention>
        <filters>
            <filter>/AEM</filter>
            <filter>/servlet</filter>
            <filter>/reportfile</filter>
            <filter>/imagefile</filter>
            <filter>/dwfile</filter>
            <filter>/ajsdown</filter>
        </filters>
        <app-servers>
            <app-server host="192.0.0.168" port="88" />
            <app-server host="192.0.3.131" port="80" />
            <app-server host="192.0.3.145" port="80" />
        </app-servers>
    </cluster-config>

    Notes:

    • local specifies whether to read the configurations on the local server or the cloud server. For the cloud server, set Local to False.

    • log specifies the level of information to be recorded in the log file. It can be set to the following level: debug, info, warning, error, or off.

    • timeout specifies the number of seconds the Web server waits between sending an HTTP request to PowerServer and receiving information from it. The HTTP connection timeout value is 2 times of this value.

    • polling indicates the number of seconds when the configurations will be read again.

    • arithmetic="random" indicates that the random algorithm is used to pick a PowerServer; arithmetic="sequence" indicates that the round-robin algorithm is used.

    • extention specifies the location of the virtual directory which contains ApbCluster.dll (or ApbCluster64.dll), that is /virtual-directory-alias-name/ApbCluster.dll (/ApbCluster/ApbCluster.dll in this guide).

    • filter specifies the type of pages to redirect.

    • host indicates the IP address (recommended) or machine name of the PowerServer.

    • port indicates the port number of the PowerServer.

  5. Installing the Appeon plug-in as ISAPI Filters.

    Step 1: Open Control Panel | Administrative Tools | Internet Information Service (IIS) Manager.

    Step 2: Select Default Web Site and then double-click ISAPI Filters on the right side.

    Step 3: Right-click the blank area on the ISAPI Filters page, and click Add.

    Step 4: Input ApbCluster in the Filter name box and specify ApbCluster.dll (or ApbCluster64.dll) as the ISAPI filter in the Executable box ( C:\inetpub\wwwroot\ApbCluster\ApbCluster.dll in this guide). Click OK.

    Figure 77. Add ISAPI filter

    Add ISAPI filter

  6. Copying the redirector configuration file (ApbCluster.cfg).

    Copy the ApbCluster.cfg redirector configuration file from appeon\IISSupport\conf\ to the virtual directory (C:\inetpub\wwwroot\ApbCluster in this guide) and edit the file when necessary.

    Extension_URI=/ApbCluster/ApbCluster.dll   
    MatchExpression=/AEM
    MatchExpression=/servlet
    MatchExpression=/reportfile
    MatchExpression=/imagefile
    MatchExpression=/dwfile
    MatchExpression=/ajsdown
    Log=On

    Notes:

    • The Extension_URI command specifies the location of the virtual directory which contains ApbCluster.dll (or ApbCluster64.dll), that is /virtual-directory-alias-name/ApbCluster.dll (/ApbCluster/ApbCluster.dll in this guide).

    • The MatchExpression commands specify the type of pages to redirect.

    • The Log command specifies whether to enable logging. On indicates logging is enabled; Off indicates logging is disabled.

    • The commands and parameters are case insensitive.

  7. Setting ISAPI and CGI Restrictions.

    Step 1: Open Control Panel | Administrative Tools | Internet Information Services (IIS) Manager.

    Step 2: Select the local machine (the top node), and then double-click ISAPI and CGI Restrictions on the right side.

    Step 3: Right-click the blank area of the ISAPI and CGI Restrictions page and click Add.

    Step 4: Specify the local path of ApbCluster.dll (or ApbCluster64.dll) in the ISAPI or CGI path box and input the descriptive text in the Description box, and then select Allow extension path to execute.

    Step 5: Click OK.

    Figure 78. Add ISAPI or CGI

    Add ISAPI or CGI

  8. Enabling ISAPI-dll.

    Step 1: Open Control Panel | Administrative Tools | Internet Information Services (IIS) Manager.

    Step 2: Expand Default Web Site, select ApbCluster, and then double-click Handler Mappings on the right side.

    Step 3: Right-click ISAPI-dll, and select Edit Feature Permissions.

    Step 4: Select Read, Script, Execute, and click OK.

    Figure 79. Edit feature permissions

    Edit feature permissions

  9. Adding MIME type for loading the pages without extension names or pages without MIME types defined.

    Step 1: Select Default Web Site and then double-click MIME Types on the right of the page.

    Step 2: Right-click the blank area of the MIME Types page, and click Add.

    Step 3: Specify the following settings:

    • Extension: *

    • MIME Type: application/octet-stream

    Step 4: Click OK.

    Figure 80. Add MIME type

    Add MIME type

  10. Restarting IIS.

    Restart IIS to make the new settings effective.

Type 2: Apache Web server

Manual configuration
Configuring Apache 2.0/22 with J2EE servers

J2EE servers refer to Java application servers, such as WebLogic, WebSphere, JBoss, JEUS etc. The configuration is the same for the J2EE application servers that Appeon supports.

  1. Installing PowerServer Web component to the document root of the Apache Web server.

    Make sure you have installed PowerServer Web Component to the document root of the Apache Web server. To verify it, go to the Apache document root (by default %APACHE%\htdocs) and check if there is an appeon folder which contains the Apache20Support, Apache22Support and weblibrary_ax sub-folders. If any folder is missing, go to the default installation directory of PowerServer Web Component (C:\Program Files\Appeon\WebComponent[version]) and manually copy the entire appeon folder to the Apache document root.

  2. Copying Appeon plug-in.

    Copy the mod_appeon2.so or mod_appeon22.so plug-in file from %APACHE%\htdocs\appeon\Apache2xSupport\modules to the %APACHE%\modules folder.

  3. Copying Appeon Cluster configuration file.

    Copy the cluster-config.xml file from the %appeon%\repository\<instancename>\config folder to the %APACHE%\conf folder, where %appeon% is the installation directory of PowerServer, and <instancename> refers to the name of the PowerServer instance.

    Note: The cluster-config.xml file acts as the redirector configuration file which helps the Web server redirect requests to PowerServer according to the IP addresses/ports of PowerServer, and the load balancing algorithm that it stores. This file should not be modified manually as it will be automatically updated when you change the settings in the Cluster tool of AEM. Each time after you change the settings, be sure to copy this file and replace the old file in the %APACHE%\conf folder and restart Apache.

  4. Modifying httpd.conf.

    If the application server (such as WebLogic, WebSphere, JBoss, or JEUS) is running on Windows, add the following statements into the httpd.conf file under the %APACHE%\conf folder (take mod_appeon2.so as an example):

    LoadModule appeon_module modules\mod_appeon2.so
    <IfModule mod_appeon.c>
    MatchExpression /AEM
    MatchExpression /servlet
    MatchExpression /reportfile
    MatchExpression /imagefile
    MatchExpression /dwfile
    MatchExpression /ajsdown
    </IfModule>

    If the application server is running on UNIX/LINUX, add the following statements into the httpd.conf file under the %APACHE%\conf folder (take mod_appeon2.so as an example):

    LoadModule appeon_module modules/mod_appeon2.so
    <IfModule mod_appeon.c>
    MatchExpression /AEM
    MatchExpression /servlet
    MatchExpression /reportfile
    MatchExpression /imagefile
    MatchExpression /dwfile
    MatchExpression /ajsdown
    </IfModule>
  5. Restarting Apache.

    Restart Apache for the new settings to take effect.

Configuring Apache 1.3 with J2EE servers

J2EE servers refer to the Java application servers, such as WebLogic, WebSphere, JBoss, JEUS etc. The configuration is the same for the J2EE application servers that Appeon supports.

  1. Installing PowerServer Web component to the document root of the Apache Web server.

    Make sure you have installed PowerServer Web Component to the document root of the Apache Web server. To verify it, go to the Apache document root (by default %APACHE%\htdocs) and check if there is an appeon folder which contains the Apache20Support, Apache22Support and weblibrary_ax sub-folders. If any folder is missing, go to the default installation directory of PowerServer Web Component (C:\Program Files\Appeon\WebComponent[version]) and manually copy the entire appeon folder to the Apache document root.

  2. Copying Appeon plug-in.

    Copy the mod_appeon.so plug-in file from %APACHE%\htdocs\appeon\Apache13Support\modules to the %APACHE%\modules folder.

  3. Copying Appeon Cluster configuration file.

    Copy the cluster-config.xml file from the %appeon%\repository\<instancename>\config folder to the %APACHE%\conf folder, where %appeon% is the installation directory of PowerServer, and <instancename> refers to the name of a server instance.

    Note: The cluster-config.xml file acts as the redirector configuration file which helps the Web server redirect requests to PowerServer according to the IP addresses/ports of PowerServer, and the load balancing algorithm that it stores. This file should not be modified manually as it will be automatically updated when you change the settings in the Cluster tool of AEM. Each time after you change the settings, be sure to copy this file and replace the old file in the %APACHE%\conf folder and restart Apache.

  4. Modifying httpd.conf.

    Add the following statements into the httpd.conf file under the %APACHE%\conf folder:

    LoadModule appeon_module modules\mod_appeon.so
    <IfModule mod_appeon.c>
    MatchExpression /AEM
    MatchExpression /servlet
    MatchExpression /reportfile
    MatchExpression /imagefile
    MatchExpression /dwfile
    MatchExpression /ajsdown
    </IfModule>
  5. Restarting Apache.

    Restart Apache for the new settings to take effect.