Server Security

Server Security is a set of tools for viewing and modifying all the security on the server side and prevents unauthorized access to the Appeon Web or Appeon mobile applications using an existing LDAP installation or Appeon's built-in application security. There are five tools: AEM Login, User Management, Group Management, System Security, and Deployment Security.

Figure 120. Server Security

Server Security

AEM login

The user can change the default or current username and password to log in to AEM.

Figure 121. AEM Login

AEM Login

1) Change AEM Password

The new password will overwrite the user's existing password, but the existing username will be used to login. In order to successfully change the password, the user must enter information in the following fields:

  • Old password - Correctly enter the current password (case sensitive).

  • New password - Enter a new password to replace the old password (case sensitive).

  • Confirm password - Retype the new password. The value entered in this field must match the 'New password' field (case sensitive).

2) Change AEM Username

The new username will overwrite the user's existing username, but the existing password will be used to login. In order to successfully change the username, the user must enter information in the following fields:

  • Old username - Correctly enter the current username (case sensitive).

  • New username - Enter a new username to replace the old username (case sensitive).

  • Confirm username - Retype the new username. The value entered in this field must match the New username field (case sensitive)

Note that if this is the first time you are using this AEM Login tool, the old username and password are those you specified when installing the Appeon Server. If you did not specify the username and password during the installation, the old user name and password are both "admin" by default. For security purposes, Appeon recommends that you change the username and password after the initial login.

User Management

The User Management tool in AEM can be used to manage two types of users:

  1. user accounts for all Appeon applications including Web apps and Mobile apps

  2. Appeon Workspace clients for Appeon mobile applications running in Appeon Workspace

You can create, edit and remove users in this tool. After you create the user, you can assign the users to groups in the Group Management tool.

Figure 122. User Management

User Management

User Management

If the security type is Appeon security, you can use the User Management tool of AEM to set up user accounts. This feature is not applicable to LDAP systems. For LDAP systems, use LDAP to add or remove security groups.

On the User Management page, you can view which users are currently in the system and whether their accounts are enabled or disabled. By default, all existing users are displayed.

User names and associated user information can be viewed in the following two ways:

  1. Click the Show All button to display all users.

  2. Specify filter criteria to view users:

    Step 1: Select User name, Full Name, Account Status, or Description in the dropdown list as the type of filter criteria.

    Step 2: Enter the contents that are expected to be included in the item specified in the dropdown list.

    Step 3: Enable or disable the "Exact search".

    Step 4: Click the Filter button. Users that meet the criteria will be displayed.

Adding a new user

If you want to add one or more users, click the Add User button on the User Management page and the Add User page will be displayed.

Figure 123. Add a user

Add a user

  • Username -- The user identifier. This field is required. Chinese characters are unsupported.

  • Full name -- The full name of the user. This field is optional. Chinese characters are unsupported.

  • Description -- Any appropriate user information. This field is optional.

  • Password -- The password of the new user. This field is required.

  • Confirm password -- The user must enter the new password again to confirm the password. This field is required.

  • Account is disabled -- If this checkbox is checked, the user account is disabled.

    When the account status is disabled, the user cannot load any application with the username and password if the application requires user authentication.

    When the account status is enabled, the user can load an application with the username and password if the account is assigned to a group that is in turn assigned to the application (with application access status enabled).

Editing an existing user

By clicking the Edit button on the User Management page, you can enter the Edit User page to edit an existing User.

Figure 124. Add a user

Add a user

The Edit User is similar to the Add User page except that the user name is not editable. You can modify the full name, the description, or change the password or account status in the same way as you were instructed in Adding a new user.

After making any changes, click the Save button. The changes are updated in Appeon Server.

Deleting a user

Delete a user by clicking the Delete button on the User Management page. A message box will prompt you to confirm the action.

Click the OK button to confirm the deletion or the Cancel button to cancel the deletion.

Appeon Workspace Client (Mobile only)

Appeon Workspace Client is intended for security configurations for mobile applications. It works along with Appeon Workspace Group to add extra security to your Appeon Workspace applications.

Viewing Appeon Workspace clients

In the Appeon Workspace Client table on the User Management page, you can view all the existing clients and associated client information in the system. And you can view them in the following two ways. By default, all the existing clients are displayed.

  1. Click the Show All button to display all the clients.

  2. Specify a filter criteria to view certain clients:

    Step 1: Select Client ID, Client Name, Client Status, or Description from the Search Field dropdown list box.

    Step 2: Type your relevant keywords in the keyword text box.

    Step 3: Enable or disable the Exact Search check box.

    Step 4: Click Search. Clients that meet the criteria will be displayed.

Adding an Appeon Workspace client

To add an new Appeon Workspace client:

Step 1: Click Add Client in the Appeon Workspace Client table.

Step 2: On the Appeon Workspace Client ID page that displays, type a client ID in the Client ID text box; enter a client name in the Client Name text box; and then enter some descriptions for the client in the Description text box.

Figure 125. Add Appeon Workspace Client

Add Appeon Workspace Client

Step 3: (Optional) If you want to disable the Appeon Workspace client so that it cannot access any Appeon mobile application on this Appeon Server, select the This Appeon Workspace Client is Disabled checkbox.

Detailed configuration descriptions are shown in the following table.

Table 38. Add Appeon Workspace Client Items

Items

Descriptions

Client ID

The unique identifier to identify the mobile device. It must be the same value as the Appeon Workspace ID which can be obtained from the About window of Appeon Workspace. See the Appeon Workspace User Guide (Mobile only) for details.

Client Name

The display name of the mobile client. It can be any text you like.

Description

Any other information for this mobile client. This field is optional.

This Appeon Workspace Client is Disabled

The client's accessbility to the Appeon mobile application on this Appeon Server.

You can select this checkbox to disable the client account, instead of deleting it. The disabled client cannot access any mobile application on this Appeon Server.


Step 4: Click the Save button to add the client, or click Save and Add to save the client and begin to add another one.

Editing an Appeon Workspace client

To edit an Appeon Workspace client:

Step 1: In the Appeon Workspace Client table, click the Edit button associated with an Appeon Workspace client ID, and then make the changes you intend to.

You can only change the Appeon Workspace client name and description, and/or you can also enable or disable a client by selecting or deselecting the This Appeon Workspace Client is Disabled checkbox.

Figure 126. Edit Appeon Workspace Client

Edit Appeon Workspace Client

Step 2: Click Save to save the changes.

Deleting an Appeon Workspace client

To delete an Appeon Workspace client, click the Delete button associated with an Appeon Workspace client ID in the Appeon Workspace Client table, and click OK to confirm the deletion in the popup dialog box.

You can only delete the Appeon Workspace client one by one.

Group Management

The Group Management tool in AEM is used to manage user groups and Appeon Workspace groups.

Figure 127. Group Management

Group Management

Group Management

If the security type is Appeon security, you can use the Group Management tool of AEM to set up various security groups and assign user accounts to the groups. This feature is not applicable to LDAP systems. For LDAP systems, use LDAP to add or remove security groups.

Viewing groups

The group information and associated user information can be viewed in the following two ways:

  1. Click the Show All button to display all the groups.

  2. Specify filter criteria to view groups:

    Step 1: Select Group or Description in the dropdown list as the type of the filter criteria.

    Step 2: Enter the contents that are expected to be included in the item specified in the dropdown list. Based on the criteria, groups that contain the specified information will be displayed.

    Step 3: Enable or disable the Exact search.

    Step 4: Click the Filter button and the groups that meet the criteria will be displayed.

Adding a new group

To add one or more groups, click the Add Group button in the Group Management table and the Add Group page will be displayed.

Figure 128. Add a group

Add a group

  • Group name - The group identifier. This field is required. Chinese characters are unsupported.

  • Group description - Some explanation about the group. This field is optional.

  • Assign or unassign users to the group.

    1. To assign a user to the group

      Select a user from the Unassigned Users list. Click the forward button to shift the user to the Assigned Users list.

      By default, all the users are listed in the Unassigned Users list. The users are configured in the User Management tool.

    2. To unassign a user from the group

      Select a user from the Assigned Users list by clicking it. Click the back button to shift the user to the Unassigned Users list.

Editing an existing group

To edit a specific group, click the Edit button in the Group Management page and enter the Edit Group page.

The Edit Group page is similar to the Add Group page except that the group name is not editable. You can modify the group description, or assign (unassign) users to the group in the same way as instructed in Adding a new group.

Deleting a group

Delete a group by clicking the Delete button in the Group Management page. A message box will prompt you to confirm the action.

Click the OK button to confirm the deletion or the Cancel button to cancel the deletion.

Appeon Workspace Group

Appeon Workspace Group is intended for security configurations for mobile applications.

Viewing Appeon Workspace user groups

In the Appeon Workspace Group table, you can view all the groups and associated group information in the system. And you can view them in the following two ways. By default, all the existing groups are displayed.

  1. Click the Show All button to display all the groups.

  2. Specify a filter criteria to view certain groups:

    Step 1: Select Group Name or Description from the Search Field dropdown list box.

    Step 2: Type your relevant keywords in the keyword text box.

    Step 3: Enable or disable the Exact Search check box.

    Step 4: Click Search. Groups that meet the criteria will be displayed.

Adding an Appeon Workspace group

To add a new Appeon Workspace group:

Step 1: In the Appeon Workspace Group table, click Add Group.

Figure 129. Add Appeon Workspace Group

Add Appeon Workspace Group

Step 2: On the Add Appeon Workspace Group page that displays, type a group name in the Group Name text box, and then enter a description in the Group Description text box.

Step 3: Assign users into the Assigned Appeon Workspace Clients group by selecting a client name from the Unassigned Appeon Workspace Clients list box and then clicking the forward icon. You can create clients in the Appeon Workspace Client tool.

Step 4: Click the Save button to save the group, or click Save and Add to save the group and begin to add another one.

Editing an Appeon Workspace Group

To edit an Appeon Workspace Group:

Step 1: In the Appeon Workspace Group table, click the Edit button associated with an Appeon Workspace group, and then make the changes you intend to.

Figure 130. Appeon Workspace Group

Appeon Workspace Group

You can only change the descriptions and assign new users into the group or delete assigned users from the group, as showing in the following figure.

Figure 131. Edit Appeon Workspace Group

Edit Appeon Workspace Group

Step 2: Click Save to save the changes.

Deleting an Appeon Workspace Group

To delete an Appeon Workspace Group, click the Delete button associated with an Appeon Workspace group in the Appeon Workspace Group table, and then click OK to confirm the deletion in the popup dialog box.

You can only delete the Appeon Workspace Group one by one.

User and Group Management at LDAP server side

Managing users and groups "at the LDAP server side" means that the administrator adds/removes/modifies users and groups in the LDAP/LDAPS server rather than in the user management and group management of AEM. The following are the steps to perform LDAP/LDAPS user and group management:

  1. Set up the LDAP/LDAPS server in the system

    Refer to the documentation supplied by the LDAP/LDAPS server vendor for installation and setup instructions for your LDAP/LDAPS server.

  2. Create an organization unit in the LDAP server.

    Only a single organization unit can be used to host all the groups and users for the Appeon Web or Appeon mobile application.

  3. Create/manage users and groups in the organization unit in accordance with the LDAP/LDAPS server documentation.

System Security

Figure 132. System Security

System Security

As the above figure illustrates, the System Security covers three important settings:

  • Security Toggle -- Turns application security on and off at the system level. All application security and settings in Client Security are ignored when set to off, but the settings will not be lost.

  • Security Type -- Determines which system, Appeon built-in system or LDAP server, is applied to implement the security feature. Note that the Group Management and User Management tools only work with the Appeon built-in system.

  • LDAP Interface Settings -- If you are using LDAP server, the user must configure LDAP interface settings to connect the LDAP server with Appeon Server. If using LDAPS, only Microsoft LDAP is supported when the application server is EAServer.

Security Toggle and Security Type

The following table shows how the Security Toggle and Security Type settings determine which security tools are applied and what security features are performed.

Table 39. Security toggle, Security type and Security Settings

Security Toggle

Security Type

Settings in Security

Security Feature

Off

Not Available

Not Available

Disabled. Unauthorized users have access to load or deploy applications.

On

Appeon Security

User Management

Group Management

Client Security

Deployment Security

The Appeon built-in security is enabled. Only authorized groups and users of a deployed application are allowed to load or deploy the application. Three consecutive invalid logins will result in an exceptional exit of the login dialog from the application. In this case, the user can click the Refresh button to obtain the login dialog again and re-log in with the correct username and password.

LDAP Security

LDAP Interface Settings

Client Security

Deployment Security

Enabled. Any authorized LDAP groups and users of an application are allowed to load or deploy the application. Three consecutive invalid logins will result in an exceptional exit of the login dialog from the application. In this case, the user can click the Refresh button to obtain the login dialog again and re-log in with the correct username and password.


  • Appeon security and LDAP security provides the user with options of using Appeon Server or LDAP to assign groups to the application. The security groups will be read from either LDAP (if it is LDAP security) or Appeon Server (if it is Appeon security).

  • When the user attempts to change the security type, a message box will prompt the user to confirm the change.

LDAP Interface Settings

If you are using the LDAP security, you must perform additional steps to access and manage the user/group information.

Limitations

There are several limitations about using LDAP with Appeon Server:

  1. One Appeon Server can be configured with only one LDAP domain, which means, all the users and groups must be in a single domain.

  2. Only the "Security" type of LDAP Group is supported, not the "Distribution" type.

  3. Only "User logon name" (not the "Display name") can be used in the LDAP Logon Dialog when running the application.

For detailed information, please refer to the Appeon LDAP Security Configuration Guide at http://support.appeon.com/index.php?/Knowledgebase/Article/View/22/0/appeon-ldap-security-configuration-guide/.

LDAP Interface Settings in AEM

To access the user and group information on your LDAP server, it is necessary to provide the LDAP interface settings in AEM. AEM interfaces with the LDAP server every time it opens the page that displays the users and groups information stored in the server.

All the fields in the LDAP Interface Settings group box are required:

  • LDAP host -- The IP address or domain name of the LDAP Server.

  • LDAP port -- Port of the LDAP Server.

  • LDAP DN -- The distinguished name uniquely identifies the LDAP directory.

    If using Netscape LDAP or Sun LDAP, the LDAP DN should be "ou=AAA, o=BBB", where AAA stands for the organization unit in which all the groups are created, and BBB stands for the domain name.

    For Microsoft LDAP, the LDAP DN should be "DC=AAA, DC=BBB, (DC=CCC)", where AAA stands for the domain component (DC) that contains all the groups, and BBB stands for the domain component that contains the AAA component.

    If using IBM LDAP, the LDAP DN should be "o=AAA, c=BBB", where AAA stands for the organization suffix, and BBB stands for the country.

  • LDAP type -- Type of the LDAP server.

    There are four options (the LDAP servers that Appeon supports): Netscape LDAP, Sun LDAP, Microsoft LDAP, and IBM LDAP.

    Table 40. Supported LDAP types

    LDAP types

    Requirements

    Netscape LDAP

    Netscape LDAP 4.2 or above

    Sun LDAP

    Sun LDAP 5.1 (Sun LDAP is very similar to Netscape LDAP)

    Microsoft LDAP

    Windows 2000, 2003, & 2008 Active Directory

    IBM LDAP

    Directory Services (LDAP) 5.1


  • Admin username -- The administrator username.

    If using Microsoft LDAP, the username should be the username for the domain of the LDAP (The username has access rights to the specified LDAP domain component).

  • Admin password -- The administrator password.

  • Use SSL -- If Yes is selected, the communication between Appeon Server and LDAP Server will use LDAPS protocol. You need to provide the Certificate Authenticated file of LDAPS. If No is selected, the communication between Appeon Server and LDAP server will use LDAP protocol.

  • Certificate File -- The Certificate authenticated file of LDAPS.

After all the fields are filled, do the following:

  1. Click the Test LDAP Settings button to test whether the settings are correct or not. If the message indicates that the settings are incorrect, continue to verify the settings until the LDAP settings are correct.

  2. Click the Save button.

Deployment Security

You can use the Deployment Security tool to manage Appeon Server deployment security, which controls what PowerBuilder developers are allowed to deploy applications to Appeon Server.

Corresponding to the Deployment Security in AEM, Appeon Developer requires PowerBuilder developers to specify deployment user name and password in the Appeon Server profile configuration. If the user name and password of the Appeon Server profile does not match the setting in Deployment Security, the Appeon Server profile will not take any application deployments.

Figure 133. Deployment Security

Deployment Security

The Deployment Security tool enables you to do the following:

  1. Disable deployment security for Appeon Server

    Select the Security Off radio button in the "Application Deployment Security Settings" group box. When the deployment security is off, the user name and password in the Appeon Server profile will be ignored, and the Appeon Server profile will always work for application deployments.

  2. Enable deployment security for Appeon Server

    Step 1: Select the Security On radio button.

    Step 2: Select a group from the Unassigned Groups list and click the forward button (">>>") to shift the group to the Assigned Groups list. By doing this, that group obtains the permission to deploy applications to Appeon Server. If a user name and password that belongs to the group is specified in the Appeon Server profile configuration in Appeon Developer, the profile will work for application deployments. Otherwise, application deployments to the Appeon Server profile give an error message "Failed to call methods in Appeon Server; cannot find the user..."

    By default, all groups are listed in the Unassigned Groups list. The groups are read from the Appeon Server (if the security type is Appeon security) or the LDAP server (if the security type is LDAP security) in use. You can use back button ("<<<") to shift the group to the Unassigned Groups list.